ISO 16792:2021 Technical product documentation — Digital product definition data practices
标准简介
Technical product documentation — Digital product definition data practices由国际标准化组织于2021-04-07发布，适用于世界范围。标准截图
标准文档说明
标准文档类型为Technical product documentation — Digital product definition data practices高清PDF版本（文字版），标准文档内可进行搜索，可以复制原文，可粘贴。标准部分原文
INTERNATIONAL STANDARD ISO 16792:2021
Technical product documentation — Digital product definition data practices
1 Scope
This document specifies requirements for the preparation, revision and presentation of digital product definition data, hereafter referred to as data sets, complementing existing standards. It supports two methods of application: 3D model-only and 3D model with 2D drawing in digital format. The structure of this document presents requirements common to both methods followed by clauses providing for any essential, differing requirements for each method. Additionally, its use in conjunction with computer-aided design (CAD) systems can assist in the progression towards improved modelling and annotation practices for CAD and engineering disciplines, as well as serving as a guideline for CAx software developers.
The actual definitions for the interpretation, in particular the ISO TPD and ISO GPS rules, are taken from the original definition standards, e.g. ISO 129-1 and ISO 1101.
When the term model is used in this document it applies to both design models and annotated models.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 128-2, Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines
ISO 128-3:2020, Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts
ISO 129-1, Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles
ISO 1101, Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
ISO 2553, Welding and allied processes — Symbolic representation on drawings — Welded joints
ISO 3098-1, Technical product documentation — Lettering — Part 1: General requirements
ISO 3098-5, Technical product documentation — Lettering — Part 5: CAD lettering of the Latin alphabet, numerals and marks
ISO 5457, Technical product documentation — Sizes and layout of drawing sheets
ISO 5459, Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
ISO 7200, Technical product documentation — Data fields in title blocks and document headers
ISO 8015, Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
ISO 10209:2012, Technical product documentation — Vocabulary — Terms relating to technical drawings, product definition and related documentation
ISO 16792:2021
ISO 11442, Technical product documentation — Document management
1)
ISO 21920-1 , Geometrical product specifications (GPS) — Surface texture: Profile —Part 1:Indication of surface texture
ISO 25178-1, Geometrical product specifications (GPS) — Surface texture: Areal — Part 1: Indication of surface texture
ISO 80000-1, Quantities and units — Part 1: General
IEC 82045-2, Document management — Part 2: Metadata elements and information reference model
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 10209 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1 General terms and definitions
3.1.1
absolute coordinate system
initial model coordinate system in the active CAD model used to define the location of digital elements in that CAD model
Note 1 to entry: The active CAD model may be a part, subassembly or assembly.
Note 2 to entry: This absolute coordinate system has absolute origin of 0,0,0.
3.1.2
offset section
stepped cutting plane to include features not located in a straight cutting plane
Note 1 to entry: 2D offset section views are drawn as if the offsets were in one plane, and the offsets are not indicated in any manner in the section views. 3D offset section views are shown by cutting through the part in an offset manner.
3.1.3
product definition data set
data set
collection of one or more computer files that discloses (directly or by reference), by means of graphic or textual presentations, or combinations of both, the physical and functional requirements of a product
3.1.4
user-defined coordinate system
model coordinate system which is created in the CAD model by the user in addition to the absolute coordinate system
1) Under preparation. Stage at the time of publication: ISO/DIS 21920-1:2021.
网盘链接
百度网盘：https://pan.baidu.com/s/1VgQ_Atc44fvSdTmoQMbXJw
提取码：n9h6
【温馨提示】大资料ISO是提供信息发布的专业信息类网站，所有内容均由用户发布，不代表本站观点，本站亦不存储所涉及的文件及资料。如有【免费资料】以及【付费资料】,请用户根据自己的需求，自行判断是否需要获取。如有交易诈骗、内容侵权可发送邮件至kf@dzl100.com，我们审查后若发现情况属实，会立即对相关内容进行删除处理。
加载用时：855.2943 毫秒
相关评论
相关文章
-
ISO 16792:2021 Technical product documentation — Digital product definition data practices
Technical product documentation — Digital product definition data practices是国际标准化组织于2021-04-07发布的ISO标准，适用于世界范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 10014:2021 Quality management systems — Managing an organization for quality results — Guidance for realizing financial and economic benefits
Quality management systems — Managing an organization for quality results — Guidance for realizing financial and economic benefits是国际标准化组织(International Organization for Standardization，简称ISO)于2021-04-20发布的ISO标准，适用于世界范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 19475:2021 Document management — Minimum requirements for the storage of documents
Document management — Minimum requirements for the storage of documents是国际标准化组织(International Organization for Standardization，简称ISO)于2021‑06‑10发布的ISO标准，适用于全球。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 19206-3:2021 Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions —Part 3: Requirements for passenger vehicle 3D targets
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions —Part 3: Requirements for passenger vehicle 3D targets是ISO于2021‑05‑21发布的ISO标准，适用于全球范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 16355-1:2021 Application of statistical and related methods to new technology and product development process —Part 1: General principles and perspectives of quality function deployment (QFD)
Application of statistical and related methods to new technology and product development process —Part 1: General principles and perspectives of quality function deployment (QFD)是ISO于2021-05发布的ISO标准，适用于世界范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units —Part 3: Floating units
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units —Part 3: Floating units是国际标准化组织(International Organization for Standardization，简称ISO)于2021-03发布的ISO标准，适用于国际，世界范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 17226-1:2021 INTERNATIONAL STANDARDIULTCS/IUC 19-1:2021(E)Leather — Chemical determination of formaldehyde content —Part 1: Method using high-performance liquid chromatography
INTERNATIONAL STANDARDIULTCS/IUC 19-1:2021(E)Leather — Chemical determination of formaldehyde content —Part 1: Method using high-performance liquid chromatography是国际标准化组织于2021-02发布的ISO标准，适用于国际范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 16140-3:2021 Microbiology of the food chain — Method validation —Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
Microbiology of the food chain — Method validation —Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory是国际标准化组织于2021-01发布的ISO标准，适用于全球。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 16321-1:2021 Eye and face protection for occupational use —Part 1: General requirements
Eye and face protection for occupational use —Part 1: General requirements是ISO于2021-03发布的ISO标准，适用于全球。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 10140-1:2021 Acoustics — Laboratory measurement of sound insulation of building elements —Part 1: Application rules for specific products
Acoustics — Laboratory measurement of sound insulation of building elements —Part 1: Application rules for specific products是国际标准化组织(International Organization for Standardization，简称ISO)于2021-05发布的ISO标准，适用于世界范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 11665-4:2021 Measurement of radioactivity in the environment — Air: radon-222 —Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
Measurement of radioactivity in the environment — Air: radon-222 —Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis是国际标准化组织于2021-03发布的ISO标准，适用于全球。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 14644-17:2021 Cleanrooms and associated controlled environments —Part 17: Particle deposition rate applications
Cleanrooms and associated controlled environments —Part 17: Particle deposition rate applications是国际标准化组织于2021-02发布的ISO标准，适用于全球范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 10315:2021 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic method
Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic methodWARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of any other restrictions prior to use.是国际标准化组织(Interna
-
ISO 19290:2021 Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette smoke — Method using LC-MS/MS
Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette smoke — Method using LC-MS/MS是国际标准化组织于2021-02发布的ISO标准，适用于国际范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。
-
ISO 10140-4:2021 Acoustics — Laboratory measurement of sound insulation of building elements —Part 4: Measurement procedures and requirements
Acoustics — Laboratory measurement of sound insulation of building elements —Part 4: Measurement procedures and requirements是ISO于2021-04发布的ISO标准，适用于全球范围。本次分享的标准文档为高清PDF（文字版），标准文档内可搜索，可复制，可粘贴。本文结尾附网盘链接。