ISO 14945:2021 Small craft — Builder's plate

标准简介

标准截图

标准文档说明

标准部分原文

Small craft — Builder's plate

1 Scope

This document specifies requirements for the uniform display of the information exhibited on the builder’s plate of small craft.

Personal watercraft are excluded from the Scope of this document.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 12217-1:2015, Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-

sailing boats of hull length greater than or equal to 6 m

ISO 12217-2:2015, Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m

ISO 12217-3:2015, Small craft — Stability and buoyancy assessment and categorization— Part 3: Boats of hull length less than 6 m

ISO 14946:2021, Small craft — Maximum load capacity

3 Terms a nd definiti ons

For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp

— IEC Electropedia: available at http:// www .electropedia. org/ 3.1

design categories

description of the sea and wind conditions for which a craft is assessed to be suitable

Note 1 to entry: The design categories are defined in ISO 12217 (all parts).

3.2

builder’s plate

label or plate displaying basic user information related to the small craft (3.7)

3.3

person’s symbol

graphic representing a person with a mass of 75 kg

3.4

suitcase symbol

graphic of a suitcase representing a load of a given mass that can be carried when the craft is underway, such as personal equipment, personal safety equipment, spare parts, tools, dry provisions, fishing tackle, portable tanks

Note 1 to entry: This mass is expressed in kilograms (kg).

3.5

outboard engine symbol

graphic of an outboard engine representing the total maximum recommended outboard engine mass for all engines

Note 1 to entry: This mass is expressed in kilograms (kg).

3.6

propeller symbol

graphic representing the maximum recommended power rating

Note 1 to entry: The power rating is expressed in kilowatts (kW).

Note 2 to entry: An example of the propeller symbol is shown in Figures A.1 and A.2, Key item 7; the symbol is registered as ISO 7000-3646.

3.7

craft

small craft

recreational boat, and other watercraft using similar equipment, of up to 24 m length of hull (L )

H

Note 1 to entry: The measurement methodology for the length of hull is defined in ISO 8666.

[SOURCE: ISO 8666:2020, 3.15, modified – Note 1 to entry has been added.]

4 General requirements

4.1 Material and fixing

The builder’s plate shall be a rigid plate or flexible label permanently affixed to the craft. Alternatively, the craft shell may be used for the marking.

4.2 Marking

Characters, symbols, figures and other markings on the builder’s plate shall be carved, stamped, burned, embossed, moulded, etched, printed, affixed by permanently setting adhesive, or be applied by other suitable means. Alternatively, the information may be printed or etched on the craft itself.

The characters shall contrast or be on a different level to the background so that alterations are obvious.

The colours applied to the label shall be UV and fade resistant.

4.3 Size of characters

The required characters shall be at least 5 mm in height.

Other characters shall be at least 3 mm in height.

4.4 Size of pictograms and symbols

Pictograms and symbols shall be at least 8 mm in height.

网盘链接

百度网盘：https://pan.baidu.com/s/12g7GTIddAbAzrno71RwRjg
提取码：jjz8