ISO 18530:2021 Health informatics — Automatic identification and data capture marking and labelling — Subject of care and individual provider identification
标准简介
Health informatics — Automatic identification and data capture marking and labelling — Subject of care and individual provider identification由国际标准化组织于2021-01发布,适用于世界范围。标准截图

标准文档说明
标准文档类型为Health informatics — Automatic identification and data capture marking and labelling — Subject of care and individual provider identification高清PDF版本(文字版),标准文档内可进行搜索,可以复制原文,可粘贴。标准部分原文
Health informatics — Automatic identification and data capture marking and labelling — Subject of care and individual provider identification
1 Scope
This document outlines the standards needed to identify and label the Subject of Care (SoC) and the Individual Provider on objects such as identification (wrist) bands, identification tags or other objects, to enable automatic data capture using data carriers in the care delivery process.
It provides for a unique SoC identification that can be used for other purposes, such as recording the identity of the SoC in individual health records.
This document serves as a reference for any organization which plans to implement or improve Automatic Identification and Data Capture (AIDC) in their delivery of care process. It is based on the use of the GS1® system of standards. Other solutions, such as using other identification systems (for example, systems based on ISBT 128), are possible but not addressed by this document.
This document describes good practices to reduce/avoid variation and workarounds which challenge [5][6]
the efficiency of AIDC at the point of care and compromise patient safety .
This document specifies how to manage identifiers in the AIDC process, and completes the information found in ISO/TS 22220 and ISO/TS 27527.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http://w ww .electropedia .org/ 3.1
application identifier
AI
GS1® prefix that defines the meaning and purpose of the data element that follows, as defined in ISO/IEC 15418 and GS1® General Specifications
[SOURCE: ISO/IEC 19762:2016, 01.01.82]
3.2
automatic identification and data capture
AIDC
methods or technologies for automatically identifying objects, collecting data about them, and entering that data directly into computer systems, eliminating manual entry
Note 1 to entry: The methods or technologies typically considered as part of AIDC include barcodes, which can be linear or 2-dimensional symbols, and Radio Frequency Identification (RFID) tags/chips.
3.3
data capture
deliberate action that results in the registration of a record into a record keeping system
3.4
care unit
ward
subdivision of an organization where the subject of care (3.15) receives the care they need during their stay
3.5
2)
global service relation number
GSRN
identification key to identify the relationship between an organization offering services and the recipient or provider of services
Note 1 to entry: GSRN are encoded on data carriers with an Application Identifier 8018 for the recipient of a service (Subject of Care) and with an Application Identifier 8017 for the provider of a service (Individual Provider).
3.6
healthcare provider
organization or facility that delivers healthcare to subjects of care
3.7
integrating the healthcare enterprise
3)
IHE®
initiative by healthcare professionals and industry to improve the way computer systems in healthcare share information
Note 1 to entry: IHE® promotes the coordinated use of established standards to address specific clinical need in support of optimal patient care.
Note 2 to entry: Systems developed in accordance with IHE® communicate with one another better, are easier to implement, and enable care providers to use information more effectively.
3.8
individual provider
person who provides or is a potential provider of a health care service
Note 1 to entry: An individual provider is an individual person and is not considered to be a group of providers.
Note 2 to entry: Not all health care providers are recognized by professional bodies. It is for this reason that 'health care professional' has not been used to describe them. All health care professionals are providers, but not all providers are health care professionals.
3.9
individual provider identification
unique number or code issued for the purpose of identifying an individual provider
3.10
information system
organized collection of hardware, software, supplies, policies, procedures and people that stores, processes and provides access to information
2) GSRN is the GS1® identifier for service relations and is supplied by the GS1® System. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO of the service relation identifier named. Equivalent products may be used if they can be shown to lead to the same results.
3) IHE is the registered trademark of the Healthcare Information Management Systems Society. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO.
网盘链接
百度网盘:https://pan.baidu.com/s/1jYpBNpbeIHkbfTd6c57u0Q
提取码:4zb8
【温馨提示】大资料ISO是提供信息发布的专业信息类网站,所有内容均由用户发布,不代表本站观点,本站亦不存储所涉及的文件及资料。如有【免费资料】以及【付费资料】,请用户根据自己的需求,自行判断是否需要获取。如有交易诈骗、内容侵权可发送邮件至kf@dzl100.com,我们审查后若发现情况属实,会立即对相关内容进行删除处理。
加载用时:58.5496 毫秒
相关评论
相关文章
-
ISO 18530:2021 Health informatics — Automatic identification and data capture marking and labelling — Subject of care and individual provider identification
Health informatics — Automatic identification and data capture marking and labelling — Subject of care and individual provider identification是国际标准化组织于2021-01发布的ISO标准,适用于世界范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 10014:2021 Quality management systems — Managing an organization for quality results — Guidance for realizing financial and economic benefits
Quality management systems — Managing an organization for quality results — Guidance for realizing financial and economic benefits是国际标准化组织(International Organization for Standardization,简称ISO)于2021-04-20发布的ISO标准,适用于世界范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 19475:2021 Document management — Minimum requirements for the storage of documents
Document management — Minimum requirements for the storage of documents是国际标准化组织(International Organization for Standardization,简称ISO)于2021‑06‑10发布的ISO标准,适用于全球。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 19206-3:2021 Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions —Part 3: Requirements for passenger vehicle 3D targets
Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions —Part 3: Requirements for passenger vehicle 3D targets是ISO于2021‑05‑21发布的ISO标准,适用于全球范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 16355-1:2021 Application of statistical and related methods to new technology and product development process —Part 1: General principles and perspectives of quality function deployment (QFD)
Application of statistical and related methods to new technology and product development process —Part 1: General principles and perspectives of quality function deployment (QFD)是ISO于2021-05发布的ISO标准,适用于世界范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 17226-1:2021 INTERNATIONAL STANDARDIULTCS/IUC 19-1:2021(E)Leather — Chemical determination of formaldehyde content —Part 1: Method using high-performance liquid chromatography
INTERNATIONAL STANDARDIULTCS/IUC 19-1:2021(E)Leather — Chemical determination of formaldehyde content —Part 1: Method using high-performance liquid chromatography是国际标准化组织于2021-02发布的ISO标准,适用于国际范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 16140-3:2021 Microbiology of the food chain — Method validation —Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
Microbiology of the food chain — Method validation —Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory是国际标准化组织于2021-01发布的ISO标准,适用于全球。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 16321-1:2021 Eye and face protection for occupational use —Part 1: General requirements
Eye and face protection for occupational use —Part 1: General requirements是ISO于2021-03发布的ISO标准,适用于全球。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units —Part 3: Floating units
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units —Part 3: Floating units是国际标准化组织(International Organization for Standardization,简称ISO)于2021-03发布的ISO标准,适用于国际,世界范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 10140-1:2021 Acoustics — Laboratory measurement of sound insulation of building elements —Part 1: Application rules for specific products
Acoustics — Laboratory measurement of sound insulation of building elements —Part 1: Application rules for specific products是国际标准化组织(International Organization for Standardization,简称ISO)于2021-05发布的ISO标准,适用于世界范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 19290:2021 Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette smoke — Method using LC-MS/MS
Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette smoke — Method using LC-MS/MS是国际标准化组织于2021-02发布的ISO标准,适用于国际范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 11737-1:2018/Amd.1:2021 Sterilization of health care products — Microbiological methods —Part 1: Determination of a population of microorganisms on products
Sterilization of health care products — Microbiological methods —Part 1: Determination of a population of microorganisms on products是ISO于2018-01发布的ISO标准,适用于全球范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 11665-4:2021 Measurement of radioactivity in the environment — Air: radon-222 —Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
Measurement of radioactivity in the environment — Air: radon-222 —Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis是国际标准化组织于2021-03发布的ISO标准,适用于全球。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 14644-17:2021 Cleanrooms and associated controlled environments —Part 17: Particle deposition rate applications
Cleanrooms and associated controlled environments —Part 17: Particle deposition rate applications是国际标准化组织于2021-02发布的ISO标准,适用于全球范围。本次分享的标准文档为高清PDF(文字版),标准文档内可搜索,可复制,可粘贴。本文结尾附网盘链接。
-
ISO 10315:2021 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic method
Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic methodWARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of any other restrictions prior to use.是国际标准化组织(Interna